Back in May 2017, I wrote a blog post about negative side waterproofing (NSW). But I was still feeling troubled. The standardized test for NSW from the U.S. Army Corps of Engineers (“Standard Test Method for Water Permeability of Concrete”) is really complicated; the schematic seems impossible to decipher (see Image #1 in the slideshow). Instead of using this test, could we do a real-world, Wingnut-style test for negative-side waterproofing?

BuildingGreen’s president, Nadav Malin, recently received the Honorary AIA designation. The American Institute of Architects (AIA) “recognizes the notable contributions and service of people outside of the architecture profession with honorary membership in the Institute,” according to its website.

Why and how do buildings fail? In this quick video, Paula Melton and Peter Yost discuss what they learned in the process of writing their feature article “How Buildings Fail Their Users.” The article includes seven stories of building failure and lessons learned. Read the feature article.

 At the end of my recent blog post on Kooltherm rigid phenolic foam insulation, I mentioned that the roof and wall assemblies at an energy retrofit project in Brattleboro, Vermont, were insulated with cellulose by a company called American Installations.

Improving the thermal performance of an existing attic is often challenging: workers are faced with narrow cavities, low clearances, and cladding systems that make it hard to achieve desired R-values while still maintaining the necessary drying potential of the assembly. The house at 81 Chapin Street in Brattleboro, Vermont, is no exception. It’s a 100-year-old wood-framed two-story home that Candace Pearson and Alex Beck are determined to comprehensively retrofit to high performance.

Julie Paquette has been Director of Energy Management at Yale University for about 6 years. That means the buck stops at Paquette’s desk for the energy consumption of over 400 buildings on campus. Yale has a pretty sophisticated approach to energy, including the Yale Facilities Energy Explorer, an energy dashboard system that shows energy consumption and details for every one of those 400 Yale buildings.

Typical pins on moisture meters are ½ inch long, meaning you can only determine moisture content by weight near the surface of building assemblies and materials (including wood, gypsum wallboard, and concrete). But I often find myself needing to assess moisture content of first condensing surfaces in walls and ceilings or well below the surface of basement slabs. This article looks at ways to extend the reach of a moisture meter. (For introductory information on moisture meters, see Tools of the Trade: Moisture Meters.)

Paul Hawken’s book Drawdown looks at a number of strategies that would “reverse the buildup of atmospheric carbon within thirty years.” Based on careful analysis, his team concluded that the number-one action we can take to reverse anthropogenic global warming is to manage high global warming potential (GWP) refrigerants. Wait…what?!

When we bought our home (built in 1907), I called in a favor from an electrician friend of mine to upgrade the 60-amp to a 100-amp service. Having worked together in New Hampshire where many of our projects were on sites full of ledge, he smirked when he told me: “Here, you go try and drive this 12-foot copper grounding rod!” No more than 10 minutes later I came in and said, “How much of the rod should remain above grade?”

If the number of events on this topic is any indication, 2017 will go down as the year that Greenbuild became all about products. Why? Here’s my take on it:

I first “learned” about VersaDry when a colleague of mine here at BuildingGreen — our materials and product expert, Brent Ehrlich — sent me the photo reproduced at right.

Back in the early days of airport noise mitigation programs, there was a pretty strong link between air leakage and sound.

Whenever my wife starts a conversation with, “OK, Mr. Building Scientist,” I know I am in some kind of trouble. That proved to be the case one day when we were out hanging laundry on the south side of our house.

There are a lot of different ways to get continuous air and water control layers on the exterior of a building enclosure. You can use housewrap, taped-and-sealed rigid foam insulation, liquid-applied membrane, or either the Huber Zip or Georgia-Pacific ForceField system. Each approach has strengths and weaknesses.